The main purpose and working process of a hot ball anemometer
The hot ball anemometer uses the basic principle of rapid heating to accurately measure wind force. The sensitive component for accurately measuring wind force is a spherical component with a diameter of 0.8mm. It is a handheld, intelligent system, and intelligent low wind precise measurement basic instrument that can accurately measure wind force, exhaust air volume, temperature, and environmental humidity as an integrated multi-functional instrument and equipment.
The main uses of the hot ball anemometer are:
The intelligent hot ball anemometer is based on the basic element of accurately measuring wind force, which enhances the functions of calculating exhaust air volume, calculating air pressure, accurately measuring temperature and air humidity, and forms a series of instrument panels. It is a handheld instrument panel with intelligent systems and precise measurement of low wind power. It has universal main applications in various aspects such as central heating, natural ventilation, air conditioning systems, ecological environment protection, environmental protection and energy-saving testing, climate, agriculture and animal husbandry, refrigeration, drying, occupational safety and health research.
Taking ZRQF-F30 type as an example, please refer to relevant instructions for other types.
Place the measuring rod vertically upwards in the natural environment being measured. That is done in order to reduce the compensation deviation caused by the difference between the temperature of the measurement point and the working temperature, and to tighten the oil plug to ensure the sealing of the camera. Press the "On" button once to start, and at this time, the meter will enter the heating situation and automatically carry out the zero compensation of the wind force, which takes about 30 seconds. After the compensation for heating and wind force return to zero is completed, this table will verify whether the copier is connected; When accurately measuring the wind force, it is necessary to pull out the measuring rod to make the measured wind according to the dialog box of the sensitive element, and to make the small red dot face the incoming wind. When accurately measuring the wind force using a quick and easy to measure and display method, the display information window will immediately track the change of the measured wind force and verify the working voltage of the charging battery. If the working voltage of the charging battery is not enough, the message prompt LOW will be displayed, prompting the customer to immediately replace the battery or apply an external power supply.
