The main uses and working process of hot bulb anemometer
Thermal bulb anemometer uses the principle of rapid thermal measurement to accurately measure wind force. The sensitive element for accurately measuring wind force is a spherical component with a diameter of 0.8mm. It is this kind of handheld, intelligent system and intelligent basic instrument for accurate measurement of low wind force. It is an integrated multi-functional instrument that can accurately measure wind force, exhaust volume, temperature and environmental humidity.
The main uses of hot bulb anemometer:
The intelligent thermal bulb anemometer is based on measuring wind force, and adds a series of instruments consisting of several functions such as measuring exhaust air volume, measuring air pressure, measuring temperature and humidity. It is a handheld, basic instrument panel with intelligent system and intelligent low wind precision measurement. It is used in central heating, natural ventilation, air conditioning system, ecological environment protection, environmental protection and energy saving detection, climate, agriculture and animal husbandry, refrigeration, It has a wide range of uses in various fields such as dryness and occupational safety and health surveys.
The working process of the hot bulb anemometer:
Take the ZRQF-F30 model as an example. For other types, please refer to the relevant instructions.
Place the measuring rod vertically upward in the environment being measured. This is done to reduce the zero compensation error caused by the difference between the temperature of the measuring point and the working temperature, and the oil plug is tightened to make the camera sealed. Press the "On" button to start. At this time, the watch enters the heating state and automatically returns to zero wind compensation, which takes about 30 seconds. After the heating and wind power return to zero compensation is completed, the watch will check whether the printer is connected; when measuring the wind power, the measuring rod must be pulled out so that the measured wind passes through the dialog box where the sensitive component belongs, and the little red dot faces the original direction. wind. When measuring the wind force with a fast method of instant measurement and display, the display window will directly track the change of the measured wind force and check the battery voltage. If the battery voltage is not enough, a prompt will be displayed. LOW, prompts the user to replace the battery immediately or use an external power supply.
