Moisture meters use the conductivity between two styli to measure the moisture of the object being measured. The stylus is inserted into the material to be tested to a depth of about 6 mm, and the reading on the display is the moisture content of the material to be tested. It is a new type of rapid moisture detection instrument.
The emergence of moisture measuring instrument provides a new method for seed moisture measurement. It is no longer necessary to use complicated operation methods such as drying and weighing to measure. On the contrary, it only needs simple settings, which can be obtained in a short time. The data results are displayed in a digital way, which not only simplifies the operation steps, but also has stronger operability and wider practicability, and can be widely used in the range and occasions where the moisture content of seeds needs to be measured.
However, although the moisture meter simplifies the operation steps, the operation method is very important to obtain the results. At the same time, there are also requirements for the sample. It is usually believed that the more the sample is, the more accurate the test data will be. However, this is in the determination process of the moisture meter. It is not applicable, that is to say, using a moisture meter to measure the moisture content of seeds does not require too many seed samples, but only a suitable amount of samples can obtain good repeatable results.
The moisture measuring instrument can improve the work efficiency very well. It provides moisture results, advanced heating and result prediction technology, and has the ability to control temperature to ensure rapid and uniform heating of samples, so as to quickly obtain accurate and repeatable results. Data; the moisture meter comes with a bright touch display to provide you with a real-time drying curve, allowing you to clearly understand the test process very intuitively; the automatic control icon can predict the changing trend of the moisture content, and the independent control setting can directly determine the moisture content Pass or fail, simplify your operation steps and improve work efficiency
