Three categories of infrared thermometers
(1) Infrared thermometer for human use: Forehead-type infrared thermometer is a thermometer that uses the principle of infrared reception to measure the human body. When in use, you only need to conveniently align the detection window with the forehead, and you can quickly and accurately measure the body temperature.
(2) Industrial infrared thermometer: The industrial infrared thermometer measures the surface temperature of the object, and its optical sensor radiates, reflects and transmits energy, and then the energy is collected and focused by the probe, and then the information is converted into reading display by other circuits On the machine, the laser light equipped with this machine is more effective in aiming at the measured object and improving the measurement accuracy.
(3) Infrared thermometers for animal husbandry: Non-contact infrared thermometers for animals are based on the Planck principle, by accurately measuring the body surface temperature of specific parts of the animal body surface, and correcting the temperature difference between the body surface temperature and the actual temperature. Can accurately display the animal's individual body temperature.
Determining the wavelength range: The emissivity and surface properties of the target material determine the spectral response or wavelength of the pyrometer. For high reflectivity alloy materials, there is low or varying emissivity. In the high temperature area, the best wavelength for measuring metal materials is near infrared, and the wavelength of 0.18-1.0μm can be selected. Other temperature zones can choose 1.6μm, 2.2μm and 3.9μm wavelengths. Since some materials are transparent at a certain wavelength, infrared energy will penetrate these materials, and a special wavelength should be selected for this material. For example, the wavelengths of 10 μm, 2.2 μm and 3.9 μm are used for measuring the internal temperature of glass; the wavelength of 5.0 μm is used for measuring the internal temperature of glass; , Polyester choose 4.3μm or 7.9μm wavelength. If the thickness exceeds 0.4mm, the wavelength of 8-14μm is selected.
Determine the response time: The response time indicates the reaction speed of the infrared thermometer to the measured temperature change, which is defined as the time required to reach 95% of the energy of the final reading, which is related to the time constant of the photodetector, signal processing circuit and display system. The response time of the new infrared thermometer can reach 1ms. This is much faster than the contact temperature measurement method. If the moving speed of the target is very fast or when measuring a fast-heating target, a fast-response infrared thermometer should be selected, otherwise the sufficient signal response will not be achieved, and the measurement accuracy will be reduced. However, not all applications require a fast-response infrared thermometer. For static or target thermal processes where thermal inertia exists, the response time of the pyrometer can be relaxed. Therefore, the choice of the response time of the infrared thermometer should be adapted to the situation of the measured target.
