Various applications of laser range finder
Measure roof height to determine duct length.
Calculate pipe lengths to determine static pressure drop for long pipes.
Determine how far the pipe drains to rise or fall.
Measure the distance to install or replace pipe.
Determine room volume for cooling, airflow/exchange requirements, confirm equipment size.
Determine the type of pipe laying (dimensions, volume requirements).
Dimensioning of pipes for cross-sectional point measurements.
Measure the air handler spacing distance.
pipeline
Determine the pump spacing and how far the pump needs to push the liquid to size the pump and/or motor.
Determine distances to pump pipes and pipes, especially when measuring pipe lengths behind existing walls.
Measuring the distance between water tower drives for water pressure calculations in irrigation.
Measure the size of the site to determine the required sprinkler heads.
Measure condensate lines for installation/repair.
architecture
Measure the (elevated) horizontal length to determine gutter length.
Measure distances from roads and property lines to comply with local building codes.
Determine the amount of structural material (studs, plywood) required for construction.
Determine insulation requirements (volume required).
Determine the offset required for the sewage system.
Determine the groove and hole depth.
Determine the amount of drywall to cover the surface.
illumination
Identify ceiling center points and other key locations for installing fans/lighting.
Determine light/lumen requirements based on ceiling vs. suspended lighting fixtures.
Determine the amount of power required for temporary LED lighting applications.
Determine distances to power supplies for LEDs, low-voltage lighting, and other electronic loads.
Determine the length of access to light fixtures on high ceilings for maintenance.
