What are the considerations for gas detector installation
Gas detector is an important detection instrument in most places. At present, it is mainly a portable instrument in the market, which has the characteristics of measuring at any time. However, if it is necessary to detect the gas concentration in an environment for a long time, it needs to be installed in the correct position, and some matters need to be considered during installation.
Questions to consider when installing a gas detector
1. Where should the gas detector be installed?
Before installing a gas detector, it is necessary to understand the distribution of the installation environment, such as pipe joints, valves, raw material locations, airflow conditions, etc. If the wrong location is chosen when installing the instrument, its detection effect may not be so obvious.
2. What are the environmental conditions for the installation of the gas detector?
The gas detector has strong adaptability, but the basic conditions such as humidity, temperature, and pressure should be paid attention to during installation. Generally, it can be installed directly in a ventilated factory environment. If it is used in a closed environment such as pipes and chimneys, the installation conditions need to be strictly controlled. The operating temperature of most gas detectors is: -20-50 degrees, the humidity does not exceed 90%, no condensation, and the pressure is in the range of 100kp. Although it can be installed when the installation conditions are not met, it will affect the accuracy of its measurement and the life of the instrument. Therefore, at this time, you can consider adding a gas processing device to make the gas that meets the conditions enter the gas sensor probe.
3. What will happen if there is too much dust in the installation location?
If there is too much gas dust in the installation environment, the gas sensor will be blocked and the detection accuracy will decrease. Therefore, if the instrument needs to be used in an environment with high dust, it is necessary to filter the dust and then clean it regularly according to the accumulation of dust. However, when cleaning the instrument again, it is not allowed to wipe with water or alcohol and other solutions, and a clean soft cloth should be used to clean the detector surface.
