What Are the Different Types of Gas Detectors and Methane Sensor Modules?
The selection of gas detectors should be based on the type of gas produced by the wastewater treatment plant, and gas detectors are also divided into fixed and portable gas detectors. Sewage treatment plants can combine portable and fixed gas detection equipment during installation. According to some common toxic gases, flammable and explosive gases in sewage treatment plants, corresponding gas detectors have been installed, such as methane gas detectors, combustible gas alarms, carbon dioxide alarms, etc.
Harmful combustible gas alarm is a safety equipment required by the safety inspection department to be installed. Especially after strict environmental inspections in the past two years, the requirements for safety equipment have become higher. The development and production of combustible gas alarms in China began many years ago, but the important combustible gas sensor components still rely on foreign technology. Sensors are the core components of combustible gas alarms, and in order to ensure the normal operation and monitoring accuracy of the equipment, imported sensors are still necessary. The technical engineers of Gongcaiwang recommend using TGS2610 and CGM6812. In addition, methane sensor modules can also be used for biogas concentration detection:
Japanese figaro combustible gas sensor/liquefied petroleum gas sensor - TGS2610
The combustible gas sensor TGS2610 has high sensitivity to propane and butane, making it an excellent LPG monitor. Due to its low sensitivity to volatile alcohol (a common interfering gas in residential environments), it is an ideal sensor for gas leak alarms.
Japan FIGARO Combustible Gas Pre Calibration Module - CGM6812-B00
The pre calibration module CGM6812-B00 for combustible gas sensors is a new module equipped with the Figaro catalytic combustion combustible gas sensor TGS6812, which has the characteristics of good durability and high stability.
Japan Figaro FIGARO Methane Gas Pre Calibration Module - FSM-T-01
FSM-T-01 is a pre calibration module for methane gas detectors. This module uses TGS2611 sensors in conjunction with optimized classical circuits to measure methane gas concentration. It has been pre calibrated using high-precision calibration equipment from Figaro and produced using mature aging processes. The design of this module aims to minimize development and production costs for users, making it easier and simpler for them to manufacture civilian natural gas gas alarms.
