What are the measurement advantages of the non-contact digital display thickness gauge
Traditional measurement technology cannot keep up with the measurement requirements of modern industrial machinery processing and material processing, and cannot control the production process in time. Therefore, in production, waste products often occur due to failure to detect products and control processes in time.
So, what is so good about the non-contact digital display thickness gauge? Can it adapt to the high efficiency and low cost of modern production? Below, Lanpeng Measurement and Control will answer for you:
The advantage of the laser thickness gauge is that it is a non-contact measurement without loss of accuracy due to wear, especially suitable for multi-point measurement in motion. Moreover, compared with the ultrasonic thickness gauge, the accuracy is higher, and there is no radiation pollution compared with the X-ray thickness gauge. The distance measuring sensor of the laser thickness gauge is installed on a bracket with an adjustable position, which can realize wall thickness measurement at any position.
Features and advantages of non-contact digital display thickness gauge:
1. The response speed is fast, the real-time performance is good, and the sampling frequency is not less than 200HZ.
2. The measurement is not affected by the up and down vibration of the measured object.
3. The measurement is not affected by the material of the measured object.
4. No abrasion and long service life.
5. Full digital system, easy to use, easy to operate and easy to maintain.
6. It has the alarm function of out-of-tolerance, and the red light will light up to remind when it is out of tolerance.
