Laser rangefinders use lasers to measure distances, and the measurement is automated, which is very convenient. The measured distances are generally numbers + the following measurement units. The measurement numbers obtained by different measurement units will be different. What are the measurement units of the laser rangefinder? ?
The commonly used handheld laser rangefinders are mainly measured in units of: mm (millimeters), cm (centimeters), m (meters), ft (feet, =0.3048m), in (inch, =2.54cm). The multifunctional laser rangefinder can also be used to measure the area and volume, and its units are generally ㎡ (square meters), ft² (square feet), m³ (cubic meters), and ft^3 (cubic feet).
2. How to adjust the unit of the laser rangefinder
Infrared range finder is a commonly used laser range finder. It is widely used in various measurement fields because of its fast ranging speed and high measurement accuracy. When using infrared range finder, it is sometimes necessary to adjust the range finder according to the measurement requirements. unit, such as switching from mm to m, how to adjust the unit of the laser rangefinder?
The commonly used hand-held laser rangefinders can adjust the unit directly through the above buttons. Different brands of infrared rangefinders have different buttons for adjusting the unit, some are "UNIT", some are "ON/ADJUST", according to the use Find the button according to the instructions of the manual, and then press and hold the button for 2-3 seconds, the infrared rangefinder will automatically switch the unit, the button is the cycle button, and the unit will be changed every 2-3 seconds, - until you press To switch the unit, just stop the button.
