What are the reasons for the instability of the gas detector instrument indication
Gas detectors play a very important role in industrial production activities and play a role in maintaining the safety and order of production activities. If the detector fails, it will cause serious consequences if it cannot be dealt with in time. Therefore, it is necessary to implement the fault handling and maintenance work of the gas detector, so as to fully exert its alarm function, maintain the safety of life and property, and promote the continuation of industrial activities. went well.
However, during the use of the gas detector, the instrument may fail due to some reasons. The unstable indication of the gas detector is one of the common faults. So what are the reasons for the unstable indication of the gas detector? Let's find out with the editor of the combustible gas detector company.
The main reasons for the unstable indication of the gas detector are as follows:
1. Because the gas detector is in a ventilated place, it is affected by the wind direction and the indicating instrument fails; the detector is located at the intersection of the air flow, which affects the normal operation of the indicating instrument;
2. The filter of the gas detector is blocked;
3. When the gas detector is in use, it vibrates greatly, which affects the normal work;
4. The components of the gas detector are polluted, which makes the indicator of the alarm instrument unstable.
For the gas detector instrument indicating unstable combustible gas detector, Xiaobian proposes the following solutions. If the failure is caused by the first reason, then the location where the gas detector is used should be changed. If the failure is caused by other reasons, then Filters need to be cleaned and replaced with new ones.
