What categories do methane sensor modules and gas detectors fall under?
The selection of gas detectors should be carried out according to the type of gas produced by the wastewater treatment plant. Gas detectors are also divided into fixed and portable gas detectors. Wastewater treatment plants can combine portable and fixed gas detector equipment during installation. According to some toxic gases, flammable and explosive gases common in sewage treatment plants, corresponding gas detectors are installed, such as methane gas detectors, flammable gas alarms, carbon dioxide alarms, etc.
Harmful combustible gas alarm is a safety equipment that must be installed as required by the safety inspection department. Especially after the strict environmental protection inspection in the past two years, the requirements for safety equipment are higher. The development and production of domestic combustible gas alarms began many years ago, but the important combustible gas sensor components still come from foreign technologies, and the sensor is the core component of the combustible gas alarm. In order to ensure the normal operation and monitoring accuracy of the equipment, it is still necessary to choose imported sensors. The technical engineer of Gongcai.com recommends TGS2610 and CGM6812. In addition, it can also be used
Methane sensor module for biogas concentration detection:
Japan figaro combustible gas sensor / LPG sensor - TGS2610
Combustible gas sensor TGS2610 has high sensitivity to propane and butane, and is a good LPG monitor. Because of its low sensitivity to volatile alcohol (a common interfering gas in the living environment), it is an ideal sensor for gas leak alarms.
Japan FIGARO Combustible Gas Pre-calibration Module - CGM6812-B00
Combustible gas sensor pre-calibration module CGM6812-B00 is a new module equipped with Figaro catalytic combustion combustible gas sensor TGS6812, which has the characteristics of good durability and high stability.
FIGARO Methane Gas Pre-calibration Module - FSM-T-01
FSM-T-01 is a pre-calibrated module for methane gas alarms. This module uses TGS2611 sensor with optimized classic circuit to measure the concentration of methane gas. It is pre-calibrated by Figaro's high-precision calibration equipment and produced with mature aging process. This module is designed to save development and production costs for users to the greatest extent, so that users can manufacture civil natural gas alarms more easily and simply.
