The pore time of the multimeter is approximated by the integration time, which is used for the measurement of parameters such as frequency and period.
The concept of pore time is approximated by integration time or Number of Power Line Cycles (NPLCs). This parameter is used for frequency and period measurements.
The programming command is:
FREQency:APERture {0.01|0.1|1|MINimum|MAXimum}
PERiod:APERture {0.01|0.1|1|MINimum|MAXimum}
For example, aperture time is defined as 10ms (4 and a half, minimum), 100 ms (5 and a half, default), or 1 second (6 and a half, maximum). Set the time, frequency and number of digits from the front panel.
