First and foremost, when soldering components with an electric soldering iron, PCB factories should use ROHS tin wire and take safety precautions, such as wearing gloves, gas masks, or masks. They should also pay attention to the ventilation in the workplace and the quality of the exhaust system, as well as cleaning up after work. Lead poisoning in solder can be avoided by drinking milk.
1. Take a break for a while: in general, you should take a break every hour for about 15 minutes to relieve weariness because exhaustion worsens resistance.
2. To ensure that the majority of the toxic compounds absorbed may be removed during the day, smoke less and drink more water.
3. Before going to bed, drink some mung bean soup or honey water to help you relax and improve your mood. Mung beans and honey can also help you get rid of a lot of absorbed lead and radiation.
4. Use your phone more, PHS less, and less when you can't leave the house in order to minimize your exposure to radiation.
5. To avoid damage to the body, you can make the soldering iron brighter and try using a PPD welding head. This will let the temperature to rise without using as much rosin or welding oil.
6. Try to slant your head to the side when the solder oil starts to smoke. You should slant your head to the side as you brush the water. Try not to breathe.
7. Brush with alcohol for a time and use less Tianna water to get a comparable result.
8. Hands-washing.
9. Take a bath as soon as you can before going to bed so that you can rise early and obtain enough sleep. Impurities can essentially be eliminated from your body when you get enough sleep.
10. Don a mask at the office.
