What types of gas detectors and methane sensor modules can be divided into?
The selection of gas detectors should be carried out according to the type of gas produced by the wastewater treatment plant. Gas detectors are also divided into fixed and portable gas detectors. Wastewater treatment plants can combine portable and fixed gas detector equipment during installation. According to some toxic gases, flammable and explosive gases common in sewage treatment plants, corresponding gas detectors are installed, such as methane gas detectors, flammable gas alarms, carbon dioxide alarms, etc.
Harmful combustible gas alarm is a safety equipment that must be installed as required by the safety inspection department. Especially after the strict environmental protection inspection in the past two years, the requirements for safety equipment are higher. The development and production of domestic combustible gas alarms began many years ago, but the important combustible gas sensor components still come from foreign technologies, and sensors are the core components of combustible gas alarms. In order to ensure the normal operation of the equipment and For monitoring accuracy, it is still necessary to choose imported sensors. The technical engineer of the industrial mining network recommends using TGS2610 and CGM6812. In addition, you can also use
Methane sensor module for biogas concentration detection:
Combustible gas sensor TGS2610 has high sensitivity to propane and butane, and is a good LPG monitor. Because of its low sensitivity to volatile alcohol (a common interfering gas in the living environment), it is very suitable for gas leak alarms. is an ideal sensor.
Combustible gas sensor pre-calibration module CGM6812-B00 is a new module equipped with Figaro catalytic combustion combustible gas sensor TGS6812, which has the characteristics of good durability and high stability.
FSM-T-01 is a pre-calibrated module for methane gas alarms. This module uses TGS2611 sensor with optimized classic circuit to measure the concentration of methane gas. It is pre-calibrated by Figaro's high-precision calibration equipment and produced with mature aging process. This module is designed to save development and production costs for users to the greatest extent, so that users can manufacture civil natural gas alarms more easily and simply.
