What types of gas detectors and methane sensor modules are available?
The selection of a gas detector is based on the type of type of gas produced by the wastewater treatment plant, and gas detectors are also classified as fixed and portable gas detectors. Wastewater treatment plants can combine portable and fixed gas detector equipment in the installation process. According to some common toxic gases, flammable and explosive gases in wastewater treatment plants, corresponding gas detectors are installed, such as methane gas detectors, combustible gas alarms, carbon dioxide alarms and so on.
Harmful combustible gas alarms are safety equipment required to be installed by the safety inspection department. Especially after the strict environmental protection inspection in the past two years, the requirement for safety equipment is higher. Domestic development and production of combustible gas alarms began many years ago, but one of the important combustible gas sensor components are still a foreign technology, and the sensor is the core component of the combustible gas alarm, in order to ensure the normal operation of the equipment and monitoring accuracy or to choose the imported sensors, the work of the network of technical engineers recommend the use of the TGS2610 and CGM6812, in addition. Methane sensor module can also be used for methane gas concentration detection:
Japan figaro Combustible Gas Sensor/LPG Sensor - TGS2610
The combustible gas sensor TGS2610 has high sensitivity to propane and butane, making it a good LPG monitor, and because of its low sensitivity to volatile alcohols (a common disturbing gas in residential environments), it is an ideal sensor for gas leak alarms.
Japan FIGARO Combustible Gas Pre-Calibration Module - CGM6812-B00
Combustible Gas Sensor Pre-Calibration Module CGM6812-B00 is a new module equipped with FIGARO catalytic combustion type combustible gas sensor TGS6812, which is characterised by good durability and high stability.
FIGARO Methane Gas Pre-Calibration Module - FSM-T-01
The FSM-T-01 is a pre-calibration module for methane gas alarms. The module uses the TGS2611 sensor in conjunction with optimised classical circuitry to measure methane gas concentration, pre-calibrated by Figaro's highly accurate calibration equipment and manufactured using a proven ageing process. This module is designed to minimise development and production costs and to make it easier and simpler for the user to manufacture domestic natural gas alarms.
