Where can VOC detectors be used?
1. VOC detectors can be applied in the industrial field, such as for detecting chemical weapons of mass destruction agents.
2. Used for emergency response to the leakage of highly toxic hazardous materials, there may be some heavy metal gases present in chemical plants, heavy metal plants, and other fields, which require real-time detection using instruments.
3. To detect TVOC in indoor air quality (IAQ), some newly built buildings or newly renovated residents need to use instruments to detect harmful volatile compounds emitted by decoration materials.
4. To detect volatile organic compounds in new building materials, it is recommended that building material manufacturers use VOC detectors for testing, as the materials produced in this industry usually contain excessive amounts of toxic substances TVOC volatilization.
5. For the health protection of personnel exposed to extremely toxic compounds, fixed VOC detectors can be installed in chemical plant workshops, warehouses, and other fields, while inspection personnel can be equipped with portable VOC detectors to avoid gas poisoning.
6. The VOC detector can be used for detecting fuel leaks in aviation and aerospace, such as hydrazine and dimethylhydrazine tablets.
7. Confirm personal protective equipment (PPE).
8. Use in conjunction with environmental survey instruments.
The function of VOC detector
1. The VOC detector can accurately measure the gas concentration (isobutene units) of total organic volatile compounds in TVOC.
If the target gas detected by the instrument is a single VOC gas, the concentration value of this gas can be accurately measured, provided that the specific type of VOC gas needs to be determined first.
If the detector is used in multiple VOC gas environments and the proportion of each gas is clear, it can accurately measure the concentration value of each gas (only for VOC detectors with this function).
If the user only has a rough understanding of the target gas types in the current environment, then the VOC detector can be used as an alarm for hazardous areas. The general method used is that users can select the alarm threshold of the VOC gas with the lower alarm threshold based on their approximate knowledge of the type, as the current alarm threshold set by the instrument. This ensures that the gas concentration value will alarm in a timely manner when it exceeds the set value.
