Working principle and related knowledge of laser range finder
1. The principle of using infrared ranging or laser ranging
The principle of ranging can basically be attributed to measuring the time required for light to go back and forth to the target, and then calculate the distance D through the speed of light c = 299792458m/s and the atmospheric refraction coefficient n. Because it is difficult to measure time directly, it is usually to measure the phase of continuous wave, which is called phase measuring range finder. Of course, there are also pulsed rangefinders.
It should be noted that phase measurement does not measure the phase of infrared or laser, but the phase of the signal modulated on infrared or laser. The construction industry has a handheld laser distance meter for house surveying that works on the same principle.
2. The plane of the measured object must be perpendicular to the light
Usually precision distance measurement requires the cooperation of a total reflection prism, while the rangefinder used for house measurement directly measures with smooth wall reflection, mainly because the distance is relatively short and the signal strength of the light reflected back is large enough. It can be known from this that it must be vertical, otherwise the return signal is too weak and the accurate distance cannot be obtained. So sometimes the error of the rangefinder is likely to be caused by the improper use of the measurer.
3. The object plane can be measured as diffuse reflection
It is usually possible. In actual engineering, a thin plastic plate is used as a reflective surface to solve the problem of serious diffuse reflection. The CEM flagship store is purchasing reflectors, which will be given away for free.
4. The entertainment-grade products of the pulse method laser range finder can achieve a display accuracy of 1 meter, a measurement accuracy of ±1 meter, and a measurement-grade product with a display accuracy of 0.1 meters and a measurement accuracy of ±0.15 meters.
5. The accuracy of the phase laser rangefinder can reach 1 mm error, which is suitable for various high-precision measurement purposes. The accuracy of the CEM laser rangefinder is ±1.5MM, which is already the most accurate rangefinder on the market.
