Care should be taken when storing used soldering iron tips
When there is no work, make sure that there is tin protection on the tip of the soldering iron. When soldering, the operator should not scratch the board. The amount of sponge used to rub the tip of the soldering iron should be appropriate. Wipe the sponge before the soldering operation. Normally, operators should not hit hard objects with the tip of the soldering iron to prevent damage to the coating on the surface of the tip of the soldering iron. During operation, if foreign objects, stolen goods, paint coverage, and oxidation phenomena are found on the pads, they should be cleaned first and then soldered. It is strictly forbidden to use the tip of the soldering iron to iron plastic objects, which not only reduces the service life of the tip of the soldering iron, but also produces pungent fumes that are harmful to the human body.
Clean the tip of the soldering iron with a cleaning sponge;
Wrap the tip of the soldering iron with solder
Turn off the power and wait for the soldering iron tip to cool down
Put the soldering iron pen on the soldering iron stand.
