How does the soldering iron head of the automatic soldering machine perform soldering
The automatic soldering machine is a high-tech that has only emerged in recent years. Many people can't use it well after buying it, which leads to a greatly shortened lifespan, not to mention that it may make it impossible to work. Let's share it with you. Let’s talk about how the soldering iron tip is soldered, and how to keep it in good tin volume and smoothness.
1. Tin wire problem of automatic soldering machine:
It is necessary to choose a suitable tin wire to match the soldering of the automatic soldering machine, but there must be tin on the tip of the soldering iron, and the amount of tin should not be too much, so when selecting tin wire before work, try to choose a solder wire with a moderate diameter to maintain the tin of the soldering iron tip. amount, so that the tin on the solder joints is full.
2. The tip of the soldering iron should be kept in a clean state:
The automatic soldering machine must clean the oxides on the tip of the soldering iron before use, so that the tip of the soldering iron can be kept in a good state of tinning during soldering. At the same time, after the soldering is completed, a new layer of tin should also be added to the tip of the soldering iron, so that the tip of the soldering iron will not oxidize too quickly. When cleaning the tip of the soldering iron, use a moistened special cleaning sponge to wipe off the flux residue and oxides on the tip of the soldering iron, or scrape off these things with a blade, and then start soldering.
3. The tip of the soldering iron should have tin:
The surface of the soldering iron tip must be often tinned, which can increase its durability, especially when the automatic soldering machine is not in use, it should be often coated with a layer of tin, which can greatly reduce the chance of oxidation of the soldering iron tip and make it more durable. The tip of the soldering iron is more durable.
Fourth, the choice of soldering iron head should be appropriate:
The model selection of the soldering iron head must be appropriate during automatic soldering. Incorrect selection of the soldering iron tip will not only affect the efficiency of the automatic soldering machine, but also greatly reduce the quality of the soldering. At the same time, the heat capacity of different types of soldering iron tips is also different. The larger the soldering iron tip, the greater the heat capacity. The principle of choosing a soldering iron tip is based on not affecting adjacent components, and can match the diameter of the pad and the height of the tin surface on the pin. Only in this way can it be handy when soldering.
In short, automatic soldering is a very complicated process. Although it is an automated program, we can achieve twice the result with half the effort when soldering as long as we use a scientific attitude to select the soldering iron tip.
