How to use the ammonia gas detector
Q1: Sampling method of ammonia gas detector
1. The charger is used under high load, and the charger is turned off during the charging process.
2. Remember not to use the ammonia gas detector while charging.
3. The ammonia gas detector is at least a pump-suction sampling test. During daily use, foreign matter will not be sucked into the detector, and the air inlet nozzle should not be blocked.
4. In this way, the intake volume of the air pump may be reduced or the air pump may be damaged.
5. The ammonia gas detector is based on the electrochemical principle, pay attention to the use environment to avoid high temperature, high humidity and high pressure environment.
6. If it is easy to cause damage to the sensor, generally speaking, it is the damage of the sampling pipeline of the internal structure of the instrument.
7. Over-range measurement should be avoided when used all day, but if it may cause sensor poisoning, it cannot be recovered after overloading, the sensitivity will decrease, and the zero drift will increase.、
