1.2 Introduction to the structure of the automatic tin output part
The automatic tin outlet part consists of a touch power-on device, a high-temperature melting solder device, and an adjustable
The tin gun temperature device, the automatic solder transfer device and the automatic power-off device are composed of five parts.
1.2.1 Touch Power Device
The pressure sensor and temperature sensor are applied, which are manually triggered. When the human hand touches the temperature sensor and pressure sensor module, the power supply is automatically turned on to heat the electric soldering iron.
1.2.2 High temperature melting soldering device
The high-temperature melting solder device uses electric heating wire to melt the solder, which can be heated rapidly when the power is turned on, so that the manual waiting time is shortened and the use efficiency is improved.
1.2.3 Adjustable tin gun temperature device
According to the thickness of the solder wire, the adjustable resistance is used to control the current of the heating wire by adjusting the size of the resistance, and then control the power of the heating wire to achieve the purpose of temperature adjustment.
1.2.4 Automatic solder transfer device
A micro motor is added to the welding torch, and a small gear is added to the motor to transmit the tin wire to the front end of the welding torch.
1.2.5 Automatic power-off device
The automatic power-off device combines temperature and pressure sensors, and it works after two minutes of non-use, which can not only ensure energy saving, but also avoid danger after people leave.
