Soldering iron non-stick tin treatment method
Method 1: Hang off the oxide layer on the surface of the soldering iron tip with a knife, and then dip some rosin to solve it. However, this method does not remove thoroughly, and the tip of the soldering iron will be damaged after a long time, resulting in poor heat transfer performance of the soldering iron.
Method 2: Dip the oxidized soldering iron tip into a container filled with alcohol, take it out after about 1 to 2 minutes, the oxide is completely removed, and the soldering iron tip looks brand new. The reason is that after copper oxide and alcohol are heated, a chemical reaction will occur, and copper will be reduced, which will not corrode the tip of the electric soldering iron.
Method 3: Correctly use and maintain the tool according to maintenance specifications, and use it at a low temperature as much as possible to reduce its oxidation rate and prolong its service life. Do not press hard, as long as the contact is good, the heat will be transferred normally.
