GVDAM Smart Pen-type Multimeter can automatically identify the measurement signal and automatically select the range.Smart Mode is default when power on , In this mode, the meter can automatically measure DC/AC voltage, Resistance, Continuity. DC voltage test 0~600V ±(0.5%reading+3)
AC voltage test 0~600V ±(0.8%reading+3)
Resistance test 0~4MΩ ±(1.0%reading+5) 4MΩ~40MΩ ±1.5%reading+10)
Capacitance test 0~400μF ±(4.0%reading+5) 400μF~4mF ±(5.0%reading+5)
Frequency test 0~4MHz ±(1.0%reading+3)
Phase Sequence Test
Live Wire Test
Diode Test
Continue Test
