Penetrating Food PH meter for semi-solid substances

 New Penetrating PH meter PH818M Portable Semi-solid PH Meter Dough Meat PH Detection Vegetable Bread PH Tester Temperature detector

The Penetrating PH meters are highly accurate, stable, reliable and easy to carry. The design of the product is new and beautiful, and the design is more professional, it can measure PH value and temperature. The penetrating PH meter is designed for the measurement of semi-solid substances in food production and processes such as fruit (sauces), gels, pastes, bread, dairy products and some meats.

Features

1. The Penetrating PH meters are highly accurate, stable, reliable and easy to carry

2.  it can measure PH value and temperature. 

3.  LCD Indication Alarm for over Range value

4. Tempearture Measurement Unit Switch ℃/ F 

5.  Temperature Compensation 

6.  Three points Calibratoin 

7.  HD Backlight and Data Hold Function 

8.  Apply for semi-solid substances in food production and processes such as fruit (sauces) 

Specification

The Penetrating Food PH meter  PH818M must be re-calibrated in the following cases 

1. Electrodes that have been left out of the protective cap of the probe for too long;

2. Replaced with a new probe;

3. After measuring concentrated acids (pH < 2) or concentrated bases (pH > 12);

4. Measurement of solutions containing fluoride with acidity at pH < 7 or after more concentrated organic solutions.

Note: Before and after the measurement, wash the PH probe with a low concentration of soapy water, followed by rinsing with tap water (water temperature should be below 40°C) and gently blotting dry with paper towels, do not wipe the probe.

Quality Assurance Period 1. The quality assurance period for the electrodes is the storage period, which is one year. 2.During the quality assurance period, the manufacturer shall be responsible for repairing or returning the product if it is found not to be working properly for reasons attributable to the manufacturer.

Product Details

New Arrive Penetrating PH meter PH818M

Penetrating Proble 

Designed for The Measurement of Semi-solid

substances in food production and process such as fruit (sauces), gels, pastes, bread, dairy products, and some meats, cheese and so on!

Temperature Measurement

Temperature range of the solution to be measured: 0℃～60℃

Three Points Calibration 

Packing Included

The Penetrating Food PH meter is calibrated in a three-point mode.

In the normal measurement state, press and hold the "CAL/▲" key for 3 seconds to enter the following mode: 1

. The LCD first shows [CAL 1] blinking and 4.00 constant light, clean the probe with distilled water, put the probe into PH4.0 solution, when the internal judgment of the sensor signal is stable, the LCD shows the prompt of PAS, indicating the success of CAL1 calibration, and automatically turn to the next calibration point CAL2 blinking and 6.86 constant light.

2. After a quick cleaning of the probe, the probe is inserted into the 6.86 PH solution and when the signal from the sensor is judged to be stable internally, the LCD displays a PAS prompt indicating a successful CAL2 calibration and automatically moves to the next calibration point CAL3 flashing state and 9.18 constant light.

3. After a quick cleaning of the probe, the probe is inserted into the 9.18 PH solution and when the signal from the sensor is judged to be stable internally, the LCD displays a PAS indication that all calibration points have been successfully calibrated and automatically switches to normal test mode.

4. If the calibration solution used is not the preset value, press CAL/▲ or /▼ during calibration to adjust the value to the value of the calibration solution and then calibrate. 5.If the LCD shows Err during calibration, the calibration point has failed, the calibration solution is not within the range of the calibration point or the sensor has failed.

FAQ

1. Is there any discount for bulk orders?
Yes, bulk orders are welcomed. And we will be glad to offer you better price discounts based on your order quantity. So please feel Free to contact us when you need to take large order quantities or customized products.

2. Is there any spare parts service if the order is large?

Of course, we will evaluate the quantity of spare parts according to your order.

3. The product is too expensive, can you make it cheaper for me?

Yes, we can design and produce products at different prices according to your needs.

4. Can I sell the products with your brand online/offline?

Yes, we allow you to sell the products with our brand online/offline.