Analysis of the principle of the dual-purpose magnetic eddy current coating thickness gauge
MC-3000F/N magnetic and non-magnetic dual-purpose coating thickness gauge, equipped with N\F probe, cleverly combines eddy current thickness gauge and magnetic coating thickness gauge. Users can choose a ferromagnetic thickness probe or an eddy current thickness probe to measure the coating thickness on magnetic or non-magnetic metals according to on-site needs. Greatly increases the application range of the instrument. This type of coating thickness gauge can conveniently and non-destructively measure the thickness of non-magnetic coatings on ferromagnetic materials, such as zinc, copper, chromium and other coatings on the surface of steel or coatings such as paint, enamel, fiberglass, plastic spray, asphalt and other coatings. thickness of. It can also conveniently and non-destructively measure the thickness of non-conductive coatings on non-magnetic metal substrates, such as paint, rubber, plastics, oxide films, etc. on copper, aluminum, zinc, tin and other metals. This instrument is widely used in machinery, automobiles, shipbuilding, petroleum, chemical industry, electroplating, plastic spraying, enamel, plastics and other industries. This model of coating thickness gauge uses automatic deviation tracking technology to make measurement values more accurate. The probe is processed using German process standards, and new alloy materials are used to greatly improve the service life and accuracy of the probe.
MC-3000F/N magnetic and non-magnetic dual-purpose coating thickness gauge performance indicators:
Basic measurement modes: normal mode, minimum value mode, statistical mode.
Monitoring measurement mode: Difference setting and upper and lower limit alarm settings can be performed.
You can choose to delete individual stored data, a certain group of data, or all data.
Zero-point calibration, two-point calibration and system calibration can be performed.
You can set the shutdown mode, turn on or off the backlight, and restore to factory status.
Stored values and statistical values can be printed.
There are 6 groups of data stored in groups, and each group stores 99 measurement points.
Stored measurement values can be viewed in groups.
MC-3000F/N magnetic and non-magnetic dual-purpose coating thickness gauge technical parameters
Fe probe measurement range: 0~1200um
NF probe measurement range: 0~1200um
Maximum display accuracy: 0.1 um
Under-voltage display: The under-voltage indicator icon is displayed in the upper left corner
Display mode: 128*64 dot matrix LCD, graphic display
Size/weight: 146*81*30mm 260g
