Calibration of wood moisture meter
Calibration method
①Wood preparation: Take ten varieties of wood to be tested.
②According to the instrument used, refer to the instructions of the corresponding type of wood moisture tester, and measure the moisture of various woods according to the regulations.
③ Fill in the measured data into the instrument moisture column in the moisture detector calibration table.
④Divide each tested wood into two parts, and use the balance oven method to measure the moisture content.
Precautions:
1. The moisture in the measured object is inconsistent, so the moisture contained in different positions of the same measured object will be different, so the measured results will also be different.
2. The insertion depth of the stylus directly affects the measurement results. In general, the deeper the insertion, the greater the measured moisture value, so please pay attention to the consistency of the insertion depth of the stylus.
3. If the instrument is not used for a long time, please take out the battery to prevent damage to the instrument caused by battery leakage.
