Do you know the correct procedure for using a gas detector?
Gas detector is an instrument used to detect gas, its application field is relatively wide, when we use the instrument should adopt the correct use method, the following is introduced.
Steps for using gas detector
1. Check the gas detector:
Before using the gas detector, it is necessary to carry out the corresponding test, test the instrument function can be normal operation, check the sensor status, power, alarm function is normal, at present most of the instruments are equipped with automatic detection function, the instrument will be self-checking after the start, such as Shenzhen Wanyi Technology's gas detector and so on.
2. Determine the location of the test:
In the use of gas detectors need to determine the location of the detection and detection of the type of gas, which can be based on different gases to carry out the appropriate protective measures, if there are toxic gases in the environment should do a better job of their own protection.
3. Start detection:
After determining the location and the type of gas, you can carry out the test, the gas detector probe placed in the environment to be detected, if there is a need to be measured in the environment of the gas, the display shows the concentration of the value will become larger, the user can independently set the alarm value, when the value exceeds the standard, the alarm lamp lights up, and the sound of the alarm. When the probe is close to the leakage source, the gas detector can record the reading.
4. Detection is complete:
After the measurement is completed, you can manage the detection data, the gas detector can transmit the data through Bluetooth or wireless and other transmission methods to the computer and other software to transmit the detection data to the completion of the instrument can be turned off.
5.Charging:
If the instrument power is insufficient, the gas detector will issue a power alarm signal, at this time you should turn off the power and charge its battery, the general length of the instrument charging is about 10-14 hours, after the completion of the instrument can continue to use, but there are some instruments in the use of the period of time does not need to be charged or replace the battery.
6.Maintenance and calibration
After the instrument is used, it should be maintained regularly, and the gas detector should be calibrated after half a year or one year, so that the gas detector will not produce measurement errors, so the gas detector can be calibrated regularly.
