Does the gas detector require routine calibration?
For the accuracy and safety of use, we need to calibrate the gas detector regularly. The core component of the gas detector is the sensor. The service life of the sensor is counting down from the first day it is produced. Even if you don’t use the gas detector, it still needs you to calibrate it in three months or six months or one year. Inspect, or replace sensor. In addition, all gas detectors use relative measurement methods, so they all need timely maintenance and calibration. Only when they are calibrated at any time according to the manufacturer's requirements can the expected accurate results be obtained. The place where such calibration can be done is the National Department of Metrology Institute, and it can also be sent to the after-sales service department of the manufacturer in China. The reports issued by them are different, but they can all make the instrument work normally.
In addition, in order to ensure the accuracy of the gas detector and prolong the service life of the gas detector, we need to pay attention to the following points when using the gas detector.
1. Use the portable gas detector reasonably, and check whether there is any abnormality in the components at all times. If there is any abnormality, it must be repaired or replaced in time to ensure that it can be used normally.
2. The gas detector is an explosion-proof explosion-proof equipment and must not be used beyond the specified range
