False alarms and random alarms of the combustible gas detector during use
False alarms and random alarms of combustible gas detectors are due to these reasons. 1. Installed in a place with large airflow; 2. Installed next to vibrating objects such as air conditioners; 3. Spray paint around the combustible gas detector and spray a large amount of irritating gas; 5. During the installation process, the combustible gas detector is vibrated, dropped and impacted; 6. The combustible gas detector is too close to the stove; 7. There is a lot of smoke in the room, and the gas alarm The detector itself is covered with a certain amount of dust and oil fume; 8. The combustible gas detector has expired its service life.
When the combustible gas detector has false alarms and random alarms, you should first confirm whether the machine is false alarms. The specific operation methods given by Chuangzhizhongcheng are: 1. Determine whether the gas concentration is seriously exceeding the standard, if so, take measures immediately; 2. Check whether the sensor is damaged, if so, it is recommended to return to the manufacturer; 3. Check whether the line appears Question; 4. Check whether the setting of the combustible gas detector is correct.
The combustible gas detector is a safety barrier for industrial production. Once the combustible gas detector is falsely reported, it must be paid enough attention and adjusted and repaired in time to ensure that it can be used normally.
