Features of high-frequency power supply products
High frequency switching power supply (also known as SMR) operates at high frequencies through MOSFETs or IGBTs, and the switching frequency is generally controlled within the range of 50-100kHz, achieving high efficiency and miniaturization. In recent years, the power capacity of switch rectifiers has been continuously expanding, and the single machine capacity has expanded from 48V/12.5A and 48V/20A to 48V/200A and 48V/400A. High frequency switching power supply is an upgraded alternative product to traditional rectifiers (silicon rectifiers, thyristor rectifiers). High frequency switching power supply for convenient use, small size, high efficiency, stable operation, and coating
Features of high-frequency switching power supply products
This product is precision processed using imported branded components and internationally advanced full bridge inverter converter technology, ensuring stable performance and more reliable quality of the entire machine. The entire machine has automatic protection alarm functions and soft start functions for overvoltage, overcurrent, over temperature, short circuit, and short circuit. And can be equipped with time control and computer interfaces. The DC output waveform is a high-frequency square wave, Ripple coefficient<1 [%] It can increase the plating number, reject passivation, enhance the glossiness of the coating surface, and enhance the drilling degree of the dark corners of the plated parts. And it can reduce the loss of raw materials and meet various special requirements of the electroplating industry. The 4SFG series adopts an air-cooled design for easy installation. And equipped with remote control device, easy to operate. It can be switched on and off with a load to reduce the tedious adjustment procedures. 5. Small in size and light in weight, the entire machine is made using a comprehensive anti-corrosion process, enhancing the product's anti-corrosion ability and extending its service life. 6. Efficient, energy-saving, with a work efficiency of over 90 [%], and any voltage to current ratio always matches linearly. Eliminating the losses of traditional rectifiers' voltage regulators and main transformers, saving energy by over 35%, greatly reducing electroplating costs, making it the most rational choice in the surface treatment industry.
