Guidelines for daily use of biological microscopes
After adding a cover glass, the surface of the specimen is even and the light is concentrated, making it easy to inspect.
When taking out or packing a microscope from a wooden box, hold the mirror arm tightly with your right hand and firmly hold the mirror holder with your left hand, and gently remove it. Do not extract with just one hand to prevent the microscope from falling, then gently place it on the internship table or put it into a wooden box.
When placing a biological microscope on the internship platform, first place one end of the mirror base, and then place all the mirror bases firmly. Do not allow the mirror base to come into contact with the tabletop at the same time, as excessive vibration can easily damage the lens and fine tuning device.
The microscope must be kept clean regularly to prevent oil and dust from adhering. If the lens part is dirty, gently wipe it with lens wiping paper. If there is oil stains, first dip the lens wiping paper in a little xylene to wipe it off.
Microscopes should not be exposed to sunlight or used.
The Eyepiece and the Eyepiece shall not be pulled out or removed randomly. When the eyepiece must be pulled out, the upper mouth of the lens barrel shall be covered with cloth to avoid dust falling into the barrel. When replacing the objective lens, after removal, it should be placed upside down under a clean countertop and immediately placed in the tube of the wooden box where the objective lens is placed.
After using the microscope, remove the specimen piece, lower it through the condenser, and then turn the objective lens into an "eight" shape. Rotate the coarse adjuster to lower the lens barrel to avoid contact between the objective lens and the condenser.
The biological microscope should be placed in a dry place to prevent mold.
Mechanical loading platform focusing limit to prevent accidents
The focusing position can be locked, making it easier to refocus after replacing the sample. When the upper limit of the stage is locked, accidental contact between the objective lens and the slide can be avoided, thereby preventing damage to items and the objective lens.
Specially designed pins to maintain binocular observation tube drop
Unlike conventional microscopes, binocular lenses can sometimes come off when they rotate. However, the CX22 series is equipped with a specially designed needle, effectively eliminating this concern. Eyeglasses, objective lenses, objective lens turntables, and other components are also fixed to the microscope bracket to prevent them from falling off or being lost during transportation.
Grasp the coaxial handle for smooth focusing
The coarse focusing torque can be adjusted to meet the audience's preferences and usage needs. A coaxial focusing knob allows for adjusting the left or right side of the operation from the coarse and fine focal points.
Anti coating objective lens and eyepiece observation tube
Many microscopes are susceptible to mold and fungi when used in hot and humid environments. The goal of the CX22 series is to achieve the best visual effect and longer durability through both the eyepiece and observation tube.
Easy to use and durable stand free loading platform
Because the loading platform is driven by steel wires, there are no longer protruding brackets, thus avoiding accidental injuries or finger injuries caused by the brackets. Its wear resistant and bracket free design ensures continuous and stable movement of the loading platform.
A Simple and Convenient Method for Storing and Transferring Stress in Wire Clothes Hangers
The CX22 series has been designed with a compact structure and minimal protrusion. Although traditional microscopes are typically transported in a cumbersome manner, a power cord can be obtained within the microscope, which can be wrapped around a convenient hook and installed on the back of the CX22 series.
