How to Make VOC Detectors More Effective and Safe to Use
Faced with the complexity of the environmental protection equipment market, the types and quality of gas detectors vary. From environmental testing to electronic factories, as well as petrochemical projects, many customers suffer losses due to their lack of understanding of the drawbacks of VOC detectors. So, how can VOC detectors be used more effectively and safely? Let's take a look.
1. The battery of the tester will slowly discharge even when it is turned off. If the tester is not charged for 5-7 days, the battery level will be very low, which can harm the battery. Therefore, the best method is to keep the tester charging, so that it will be fully charged and used at any time. To use the instrument, it usually needs to be charged for at least 10 hours first.
When using a detector, a small amount of organic or inorganic gas may remain in the detection chamber of the instrument, so the PID detector may have a degree. In this case, as long as the instrument is turned on in an environment without organic toxic gases and the gas inside is discharged, the counter will display as 0
3. During the use of the instrument, do not remove the filter from the instrument, otherwise the entry of smoke and dust will affect the accuracy of the instrument, damage the instrument, and affect the lifespan of the sensors inside the instrument.
To avoid electric shock, it is necessary to turn off the power before opening the instrument cover. When repairing the instrument, the battery should be disconnected from the instrument. It is prohibited to operate with the cover open. When opening the instrument cover and removing the sensor, it should be done in a safe environment.
5. For various reasons, it is best for the maintenance of VOC detectors to be carried out by professional personnel. Before operation, it is necessary to read and understand the instruction manual thoroughly.
