1. Before using the USB digital microscope, you should install the driver and the corresponding V1.0U image viewing software.
2. Connect the digital microscope to the computer, then run the Vibao1.0U software, select "Device" and then select the "usb point 2.0 v130 camera" menu
A single "dynamic video" can be imaged.
3. In the menu "Options" "Video capture pin...", the output size can choose the desired output video size;
4. In the menu "Options" "Video capture filter Video proc Amp", you can adjust the brightness, contrast, saturation of the image by yourself
Spend.
5. If the imaging light is relatively bright. You can put a piece of white paper first and adjust the focus. In the menu "Options" "Video capture
filter Video Image ” Remove the tick in front of White Balance Auto, remove the tick in front of Exposere time AUTO and Dark Area
digital microscope
digital microscope
Lose. This imaging mode is manual horizontal and horizontal mode, and the imaging system will automatically adjust the light. Then put the object to be detected on the stage.
DC Power supply 4.3inch Larger LCD Digital Microscope GD4310 Link:
Pls Clink Below Photo and Read more details about this 4.3inch Larger LCD Digital Microscope GD4310 :
