How to use an optical digital microscope
The main advantages of optical digital microscopes are: traditional optical microscopes can only be used by one person, it is difficult to share the images of the microscope, and to take the images inside the microscope, special instruments are often needed. However, since the digital microscope can be connected to the computer, the video in the microscope can be played through the projector connected to the classroom, so that the students in the classroom can watch the video together, which is also helpful for the management of classroom order.
1. Before using the USB digital microscope, you should install the driver and the corresponding V1.0U image viewing software.
2. Connect the digital microscope to the computer, then run the Vibao1.0U software, select "device" and then select "usb point 2.0 v130 camera" menu "dynamic video" to image.
3. In the menu "Options" "Video capture pin...", the output size can choose the desired output video size;
4. In the menu "Options" "Video capture filter Video proc Amp", you can adjust the brightness, contrast and saturation of the image by yourself.
5. If the imaging light is relatively bright. You can put a piece of white paper first and adjust the focus. In the menu "Options" "Video capturefilter Video Image" remove the check in front of White Balance Auto, and remove the check in front of Exposere time AUTO and Dark Area. This imaging mode is manual horizontal and horizontal mode, and the imaging system will automatically adjust the light. Then put the object to be detected on the stage.
