How to use the electromagnetic radiation detector
1
Short press the "power switch" to turn on, the default is "magnetic field radiation intensity" detection, more than 2 milligauss alarm sound; long press "detection mode conversion" does not relax, after about two seconds, switch to "electric field radiation intensity" detection.
2
Hold the electromagnetic radiation detector in your hand, align the "test area" with the object to be tested, and slowly move close to the object until it actually touches the object. The closer you get to the object to be tested, the stronger the electromagnetic field or electric field The higher it is, the faster the alarm frequency will be.
3
During the measurement, try to change the angle and position of the object to be measured by the instrument, and the maximum reading value can be obtained.
4
If the object to be tested is powered off during the measurement, in the "magnetic field radiation intensity detection" mode, the reading value should return to a zero state; in the "electric field radiation intensity detection" mode, some objects can still detect electromagnetic wave signals, It belongs to the external electromagnetic wave signal received by the item and is not harmful to the human body.
5
Briefly press "Alarm Settings" to set the alarm sound on and off.
6
Briefly press "Peak Lock" to enable and disable the peak lock function. The peak lock function can lock the maximum value during the detection process.
