Infrared Thermometer Battery Replacement Procedure
1. There is a groove on the side of the infrared thermometer. Use your finger to insert and push to open the battery compartment. The battery is inside the slot.
2. Take out the battery and you can see that the specification of the battery inside is a 9V laminated battery, and there is a link socket connected to the power supply line.
3. Pull the power supply connection seat on the battery to remove the battery.
4. Then take out the purchased battery of the same specification, and pay attention to distinguish the positive and negative poles of the battery to avoid reverse installation.
5. Connect the new battery to the power socket of the infrared thermometer and install it into the battery slot.
6. Afterwards, close the battery case of the infrared thermometer, and it will be completed when you hear a "click".
7. Finally, check that the battery on the display of the thermometer is full, which means the battery is new.
