The clamp-on grounding resistance tester can quickly measure the grounding resistance of a multi-point grounding system without disconnecting the grounding point under test from the system. The ground resistance can be measured simply by holding the jaws against the grounded conductor or ground electrode. Since the grounding system does not need to be disconnected during the measurement, the user can simultaneously measure the quality of each connection and contact on the grounding loop
> Larger measuring range:
► Loop resistance: 0.01 -- 1500Ω
► Loop inductance: 10 ----- 500μH
► Leakage current: 0.2mA ---- 40A
>: "Conversion Frequency Calculation", "Ground Voltage" and "Loop Inductance" measurement functions
>With "jaw opening assist system"
>With alarm configuration function (resistance, current, ground voltage)
>The software supports Android system devices, and can locate the test location with GPS
application:
Measure ground electrode and ground grid resistance of power system
In multi-point grounding systems, there is no need to disconnect the ground electrode under test
Measuring building ground loop resistance and continuity
Measuring leakage currents in grounded systems
Measurements can be tested and recorded in the field, then read back and analysed
Suitable for mobile communication base station towers and communication stations
Electrical equipment for swimming pools, spas and other consumer public places
