Is it necessary to recycle tin slag when the soldering station is soldering?
Solder paste has serious environmental pollution, and tin slag has high utilization value. Solder paste recycling is very necessary. Solder paste is very sensitive to high temperature gases. Once affected, its service life and performance will be greatly reduced. We must establish the concept of ecological civilization that respects nature, conforms to nature, and protects nature. In addition to satisfying the reuse of resources, the recycling of solder paste can better achieve the purpose of protecting the environment. The following solder paste manufacturers will explain:
After the solder paste is recycled, it is processed through a series of methods such as high temperature furnace and electrolysis to continue refining tin, and then make a variety of tin products to participate in the electronics industry, which can not only turn waste into treasure, but also protect the environment. Also very practical. Solder paste recycling is a relatively simple, most important and most effective measure for enterprises to improve their competitiveness! In addition, it will make a huge contribution to the effective and full utilization of global tin resources! Solder paste recycling is very necessary, and it is even more urgent to continuously improve the utilization rate of waste tin. The work of recycling not only has the effect of protecting the environment, but also the recycling of resources, and at the same time benefits everyone's physical and mental health. Therefore, the development of the recycling industry is particularly important.
The price of solder paste is relatively expensive. If it is wasted, it will increase the production cost of the enterprise and reduce the market competitiveness. Especially in the increasingly competitive electronics manufacturing industry, this aspect is even more important. More and more scrapping of solder paste is mainly caused by wrong operation. Therefore, in the use of solder paste, special attention should be paid to it: most of the solder paste should be used within 24 hours after opening. If the removed solder paste is exposed to air, it should be used within 1 hour. Solder paste set in the box not in contact with air should be used within 4 hours. The unused solder paste needs to be placed in the freezer, and it is better to take out the used solder paste again and continue to use it after stirring. If it is not used often, you need to add some new solder paste and continue to use it after stirring. Pay special attention to such an operation process, which can effectively reduce the scrapping of tin slag.
From the perspective of product quality, it is best not to use scrap solder paste in the production of the electronics industry, so as not to affect product quality and ultimately endanger the reputation of the company.
