Is it possible to equip a gas detector with different types of probes?
At present, many gas detectors can replace their detection sensors, but this does not mean that a four in one gas detector can be equipped with different detector probes at any time. Whenever replacing the probe, in addition to requiring a certain sensor activation time, the instrument must also be recalibrated. In addition, it is recommended to perform response testing on the standard gas used in various instruments before use to ensure that the instruments truly provide protection.
When measuring, the instrument compares the electrical signal generated by the concentration of the gas to be measured with the electrical signal of the standard concentration, and calculates the accurate gas concentration value. Therefore, zeroing the instrument at any time and regularly calibrating the instrument are essential tasks to ensure accurate measurement.
The importance of maintaining combustible gas detectors
Due to the harsh working environment of combustible gas detectors, they generally need to be installed outdoors, where they are often exposed to wind, sun, and various polluted gases. These gases can also enter the detector, and this is unavoidable. We can consider this situation as an objective way of damage. These damages will have a certain impact on our data. In order to better realize its value, special attention needs to be paid to maintenance and upkeep, reducing the possibility of obstruction of the combustible gas detector to a minimum, thereby ensuring the correct value of the detected data. Therefore, cleaning and maintenance of the combustible gas detector is very important and an important measure for protective work.
Of course, if the combustible gas detector is not regularly maintained, it will also increase its aging rate, and for enterprises, the loss cost of industrial components is also significant. Enterprises must remember not to forget to replace equipment after a period of time to avoid causing losses to the company.
