Key points for using anemometers
1. It is prohibited to place the anemometer probe in a combustible gas environment or in a combustible gas environment. Otherwise, it may cause a fire or even an explosion.
2. Use the anemometer correctly according to the requirements of the user manual. Do not disassemble or modify the anemometer privately to avoid damage.
During transportation, the instrument should be protected from moisture, rain, and shock.
4. Strictly prevent collision and vibration, and do not use in places with excessive dust content or corrosive properties
5. In use, if the anemometer emits abnormal odor, sound, or smoke, or if liquid flows into the interior of the anemometer, please immediately shut down and remove the battery.
6. Do not expose the probe and anemometer body to rain.
7. Do not touch the internal sensor part of the probe with your hands.
8. When the anemometer is not in use for a long time, please make sure to remove the battery to avoid battery leakage
Liquid, causing damage to the anemometer.
9. Do not place the anemometer in areas with high temperature, humidity, dust, and direct sunlight.
When there are stains on the surface of the anemometer, a soft fabric and neutral detergent can be used to wipe it. Do not use volatile liquids to wipe the anemometer. Otherwise, it may cause deformation and discoloration of the anemometer housing.
When the sensitive components of the anemometer are dirty, the probe can be gently shaken clean in anhydrous ethanol. Do not use a towel to wipe it to avoid affecting the testing accuracy
12. Do not drop or press the anemometer heavily. Otherwise, it will cause malfunction or damage to the anemometer.
13. Do not touch the sensor part of the probe while the anemometer is charged. Otherwise, it will affect the measurement results or cause damage to the internal circuit of the anemometer.
14. After the anemometer is repaired, it must be recalibrated before use.
