Maintenance of Coating Thickness Gauge
1) The LCD screen is damaged;
2) There is no data display due to poor contact between the host and the probe;
3) The host has no display;
4) No data appears after the probe is connected, although the F or NF mark is displayed.
Due to the long maintenance cycle and high price, the most important thing is that the normal work of the customer is delayed.
There are many reasons for the problem, but nothing less than:
1) The motherboard is damaged;
2) The software is damaged;
3) The probe line socket is damaged, resulting in poor contact;
4) The probe is severely worn and has no maintenance value.
The general problem is the above faults, and several problems may appear together.
During use, do not scratch the surface of the probe with hard objects to avoid damage to the coil.
