Matters needing attention in the use of five-in-one gas detector
The five-in-one gas detector MP400S can support the detection of VOC, combustible gas, oxygen, organic gas, carbon dioxide and other toxic gases. A variety of sensors can be freely selected. Selecting Shenbei Senbe Suite software will bring users a friendly and flexible wireless detection experience, continuous detection, faster response time and scientific decision for decision makers, and reduce unnecessary losses. The five-in-one gas detector MP400S has a built-in sampling pump. Can be widely used in environmental protection, metallurgy, petroleum and petrochemical, chemical industry, fire protection, safety supervision, municipal administration, sewage treatment and other industries.
Generally, in the selection of five-in-one gas detector, many users will encounter the problem of not knowing which four gases are detected by the five-in-one gas detector. How to choose the type? In fact, first of all, the five-in-one gas detector means that five gases can be detected at the same time, but which five gases are they? Many non-professional users will encounter confused problems in this selection. Secondly, there are dozens or thousands of gases for routine detection, and the safety range of each gas is different. Specific other special gases can also be selected according to their own actual conditions.
Matters needing attention in the use of five-in-one gas detector
1. Interference of gas on instrument detection. When detecting gas leakage, a single gas detector is usually used to detect a specific gas, but there is often more than one gas in the detection environment, so it is necessary to pay attention to whether other gases will interfere with instrument detection and make the detection results inaccurate.
2. Generally, attention should be paid to gas detectors with different service lives of five-in-one gas detection instruments, and their service lives are also different. When purchasing, you should ask about the service life of the instrument and use it within the warranty period. In order to save money, individual enterprises use a detector for several years without replacing it, and gas detection is only cosmetic, which eventually leads to some gas leakage safety accidents.
3. Secondly, we should pay attention to the maintenance of the five-in-one gas detector. Like other equipment, we should also pay attention to regular maintenance, calibrate and test it from time to time, and store it in a lower temperature environment to prolong its service life.
4. Users should pay attention to the concentration range detected by the gas detector. Before detection, in addition to estimating the types of toxic and harmful gases in advance according to experience, we should also roughly estimate the gas concentration, and set an alarm value through the gas detector for detection. When the gas concentration exceeds the detection range of the instrument, the detector should be turned off, because the gas detector will cause serious damage to the instrument if it is out of range for a long time.
