Portable gas detector and fixed gas detector maintenance methods
With the continuous development of China's industry, factories and enterprises are making more and more use of various gases. Along with the significant increase in industrial output, a variety of flammable and explosive, toxic and hazardous gases are also generated in the production process. Factory enterprises have realised the importance of gas detectors. But the gas detector as a precision machinery, often need to get proper care and maintenance, then the portable gas detector and fixed gas detector maintenance method is how?
Portable gas detector maintenance methods:
1, keep the detector dry, away from moisture, rain and corrosive liquids;.
2, try to reduce the detector in the dusty, poor environmental conditions under the frequency of use; 3, store the detector to choose a clean, clean, clean, clean environment.
3, storage detector to choose a clean, room temperature place, do not store the detector in the high temperature or cold places.
4, hold lightly, do not drop, knock, shake the detector, rough use will damage the instrument.
5, clean the detector, should be a clean cotton ball dipped in a little water or soapy water to gently wipe the instrument and dry in a timely manner, the detection hole filter should also be kept clean, if the liquid into the detection hole, the instrument can be inverted, so that the liquid out of their own, do not violently shake the instrument;.
6,Please use the charger provided or approved by the company to charge the detector, otherwise it will cause damage to the instrument.
7, if the detector is not running normally, do not disassemble it by yourself, please contact the distributor for maintenance in time.
Fixed gas detector maintenance methods:
1, the maintenance of fixed gas detector to carry out regular calibration, testing and inspection, in general, the calibration frequency for the calibration once a year;.
2, the installation of the detector should not be close to the wall, it should be reserved around enough space for routine maintenance and troubleshooting.
3, to keep the detector clean, can be used to wipe the surface of the detector with a soft damp cloth.
4, to ensure that the detector is in a dry state.
5, to keep the sensor filter clean, available soft clean brush for surface dirt cleaning and wipe with warm water, to be filtered after drying and re-covered;
6, when cleaning the sensor, only with a clean brush to clean the sensor, do not use water for cleaning.
7, the sensor is the heart of the gas detector, in order to make the heart can be a long time stable "beating", we must avoid as far as possible will be exposed to the sensor inorganic solvents or organic solvents produced by the odour, reduce the service life of the sensor and the accuracy of detection.
