Problems that tend to occur with micro moisture testers
Trace moisture tester as a more commonly used and practical instruments, time will fail, then in the face of the sudden emergence of failure, how to solve these problems in a timely manner?
Below for the user in the use of trace moisture tester is prone to several problems do a simple summary, as well as attached some simple solutions:
First of all, the trace moisture tester is still showing a black screen after opening. This is a common problem is whether no voltage, not connected to the power cord, whether the fuse is blown and other issues, do these routine simple checks found after the trace moisture tester still can not be switched on, it is necessary to see whether the instrument is damaged. If the instrument is really bad, then you need to return to the factory for repair.
Secondly, the trace moisture detector measurement time is too long. A lot of trace moisture tester test results are not as fast as the user would like, how can this trace moisture tester appear this situation? In fact, the user does not need to panic, because it is very likely that the choice of the inappropriate shutdown mode, just need to change a more appropriate shutdown mode can be.
The last is the poor repeatability of the trace moisture tester, many users in the purchase of trace moisture tester on the special focus on this issue, in fact, it is likely that the sample is not uniform as well as the choice of drying time is too short to lead to the sample is not dry and other simple issues led to, and is not the user would like to think of as a big problem. Therefore, only a simple solution can be.\
