How to calibrate a trace moisture meter
In the use of trace moisture tester we need to carry out calibration, this is a very important step, the purpose of doing so is to let it determine the value of more accurate. We also know that everything has to pay attention to the method, its calibration is the same, do not understand the people may be confused. In order to let the user can be more scientific use, the following method for you to introduce.
Press the "method" key, select "method 3 - moisture calibration", confirm and select "1 measurement", confirm again, select the standard, enter the amount of standard After confirming again, select the standard, input the amount of standard, confirm and press "Start" to start the calibration procedure. When the measurement is finished, press "Confirm" to save and print the calibration result, and return to the system keep state for other procedures. Repeat this operation for multiple calibrations.
Measurement of reagent titer is a necessary part of the experiment. It is especially necessary and important when the titer of the standard solution has changed or may change due to certain factors such as moisture infiltration in the atmosphere or changes in ambient temperature. The frequency of reagent calibration depends mainly on the choice of titration reagent, different reagents are not the same stability, in addition, the storage of titrant is not absolutely sealed, so it is recommended to carry out calibration before titration every day.
The above points are the method of calibration of trace moisture tester, in order to be able to better use the tester, we need to understand and master the above methods.
