The stabilized power supply should be used in a ventilated and dry place indoors, and its use conditions are strict. The installation site should be free of gas, steam, chemical deposits, dust, greasy dirt and other explosive and corrosive media that seriously affect the insulation performance of the stabilizer. There should be no severe vibration and bumps.
When the stabilized power supply arrives at the installation site, it should be handled with care, and the stabilizer should always be in a vertical upward state, and must not withstand wind, snow, ice, and hail.
Before debugging and installing the regulated power supply, it is necessary to check that all parts of the equipment should be intact, and the fixing parts should be firm and reliable. Confirm again whether the voltage of the use occasion is consistent with the voltage of the voltage stabilizer. This equipment is a three-phase four-wire system, which is adjusted in phases method, the reliability of the system neutral line (zero line) connection is high, and the contact resistance of the neutral line (zero line) connection should be reduced as much as possible. The equipment must be well connected to the ground, and the ground wire cannot be used together with the repeated ground wire (neutral wire and ground wire) of the power system to ensure safety and improve anti-interference performance. [1]
DC Power supply 30V 10A Black color Link:
Pls Clink Below Photo and Read more details about this DC Power supply 30V 10A Black color:
