Repair method for broken heating wire of soldering iron
There are two ways to deal with the breakage of the electric soldering iron heating wire. The simple repair method is to twist the broken part together. The quick and reliable solution is to remove the heating wire from the cylinder, remove the oxide near the breakage first, and then tightly twist it together. The treatment method for the fracture of electric soldering iron and heating wire
The common malfunction of electric soldering iron is the breakage of the heating wire.
1, Simple repair method: Twist the broken part together, but sparks often occur due to loose contacts after this connection, and the contacts break again shortly after use. Recommendation: How to use an electric soldering iron?
2, Quick repair method: Remove the heating wire from the cylinder, first remove the oxide near the fracture, then tightly twist it together. After twisting, sprinkle a small amount of mixed powder of glass and electric material porcelain around the joint (ground them in a ratio of 6:1). After installation, turn on the power for a few minutes, and the powder will melt and adhere to the joint. By repairing in this way, sparks will not appear at the contact point, and it is also more durable.
There is a fast and reliable repair method: remove the heating wire from the cylinder, first remove the oxide near the fracture, and then tightly twist it. After twisting, sprinkle a small amount of mixed powder of glass and electric porcelain around the joint (ground them in a ratio of 6:1). After installation, power on for a few minutes, and the powder will melt and adhere to the joint. By repairing in this way, sparks will not appear at the contact point, and it is also more durable.
