Several key points to consider to extend the life of coating thickness gauge measurement probe
When repairing the probe of the coating thickness gauge, it is often found that the magnetic core is severely worn, and some can be said to be severely damaged. For example, the gemstone core of N1 head is often damaged and broken, and the arc core of F1 head magnetic core is flattened or deformed.
Firstly, it is normal for the probe to wear out during use. But if users pay attention to its characteristics, it will extend its service life.
The common problem is that during measurement, because the test is usually conducted downwards, the user often applies more force downwards, which can easily lead to the failure of the probe core over time. The correct application method is to lightly press the probe towards the outer surface of the measured workpiece when it is one centimeter away. As the probe is designed with an induction pressure spring, it only needs to be lightly pressed. On the other hand, during the repeated movement of the probe, it is easy to collide with other objects and cause damage to the probe. Therefore, if working conditions permit, the probe can be fixed and the workpiece being measured can be brought into contact with the probe to reduce the impact of the probe
There is also a situation where, during measurement, the probe must be lifted and not pulled flat every time the next point is measured, in order to increase the wear of the magnetic core.
Finally, the probe must be kept away from strong magnetic fields to avoid changing the natural frequency of the probe and making it unusable. The correct operation and application method will extend the service life of the coating thickness gauge.
Lantai Coating Thickness Gauge is a portable thickness gauge that can quickly, non destructively, and accurately measure the thickness of coatings and plating layers; It can be used on engineering sites or in laboratories, and through the use of different probes, it can meet various measurement needs; Widely used in the manufacturing industry, metal processing industry, chemical industry, commercial inspection and other testing areas; It is an essential instrument for material protection and testing. Iron based and non-ferrous dual-use coating thickness gauge. There are two measurement methods to choose from: single measurement and continuous measurement. Split type, providing multiple probes for stronger measurement maneuverability.
