Simple Troubleshooting Methods for Gas Detector Malfunctions
1. If it is a gas detection alarm instrument and the product cannot be turned on normally during use, please check if the battery is fully charged first. If the battery is not charged, please follow the instructions to charge the battery. If it is found during use that the instrument is not working properly and there is no problem with the battery, the principle is to test the gas, wait for 3-5 minutes, and wait for the instrument value to reply. If the problem cannot be solved, if possible, re calibrate the gas (or mail it to the Beijing headquarters of New Instruments Australia for calibration). If the problem still cannot be solved, please contact our customer service personnel to mail the Australian New Instrument Beijing headquarters for maintenance.
2. If it is an online detection instrument. Check if the circuit is unobstructed. Using observation to utilize vision, smell, and touch. Sometimes, damaged components may discolor, bubble, or show burnt spots; Burned components will produce some special odors; Short circuited chips will heat up; Virtual welding or detachment can also be observed with the naked eye. If the problem cannot be solved, please contact the customer service personnel of Australia New Instrument Beijing headquarters and mail it back to us for maintenance.
Multi functional gas detector, lightweight and easy to carry
At first glance, this gas detector looks like a thickened version of an air conditioning remote control, measuring approximately 10 centimeters in length, 6 centimeters in width, and 4 centimeters in thickness. It is compact in size and easy to carry. Some mines often produce toxic and harmful gases, such as carbon monoxide, hydrogen sulfide, etc., which can cause poisoning to workers and cause incalculable losses to enterprises if they are not careful. With this simple gas detector, it is lightweight, simple, portable, and will not bring any difficulties to work.
