Technical solution of Times Coating Thickness Gauge
1. What kind of coating material is mainly measured by Times Coating Thickness Gauge?
A: Times Coating Thickness Gauge can measure the thickness of the non-magnetic coating on the magnetic metal substrate and the thickness of the non-conductive layer on the non-magnetic metal substrate.
2. Why choose Times Coating Thickness Gauge, and what are the advantages of Times products?
Answer: First of all, Times products have a very high quality assurance. It has the largest and most advanced production line in China. With a production history of nearly 20 years, the current domestic share is over 70%. In terms of service, Times has more than 20 branches in China. , hundreds of agencies, to maximize the realization of local purchase and repair nearby. As a high-paying technology company listed on the Shenzhen Stock Exchange with testing instruments as its main business, Times Company has very strong strength in production, development and sales.
3. Can the Times thickness gauge measure the thickness of the thread coating on the screw?
Answer: The thickness of the thread coating on the screw with a relatively small diameter cannot be measured by instruments in the current era.
4. Can Times Coating Thickness Gauge measure the coating of high-temperature materials?
Answer: Times thickness gauges cannot measure high-temperature materials. In principle, they can only measure materials below 60 degrees.
5. Can Times Coating Thickness Gauge measure the thickness of nickel plating?
Answer: No! Because nickel is both magnetic and conductive, the thickness of the nickel coating cannot be measured.
6. Can Times Coating Thickness Gauge measure coatings on non-metallic materials?
Answer: At present, the coating thickness gauge produced in the era can not measure the coating thickness on non-metallic materials, but can only measure the coating of non-magnetic materials on iron base and the thickness of insulating layer on non-ferrous base metal materials.
Another: For the coating measurement of non-metallic substrate materials, electrolysis, X-ray, ultrasonic coating and other instruments can be selected at present, but all methods have advantages and disadvantages. Electrolysis will destroy the material, and X-ray thickness gauges are relatively expensive. The accuracy and stability of the coating thickness gauge is not very good. At present, many users use the era thickness gauge to measure through indirect methods, for example: spraying metal materials and non-metallic materials at the same time during the spraying process, and then measuring The thickness of the metal coating indirectly obtains the thickness of the spraying of non-metallic materials.
7. Can it measure the thickness of film and paper?
Answer: The thickness of films and papers that meet the thickness requirements can be measured by lining the metal substrate at the bottom. At present, there are many customers for this application.
8. Can the coating be measured at about 5 microns? Which instrument is more suitable?
Answer: The optional Times F400 probe can measure the thickness of 5um stably
9. Can chromium plating on copper be tested?
Answer: Times eddy current thickness gauges can measure chrome-plated workpieces on copper, but the chromium layer must be less than 40um.
10. The inner and outer walls of the steel pipe are coated, can it be measured?
Answer: There is a special F1/90 probe for the electroplating layer on the inner wall of the pipe that meets the requirements of the measurement material, and the minimum radius requirements are:
R>7mm is enough.
11. The coating of our factory is a fireproof material with a thickness of 5-8 millimeters. Can you use your factory's products for measurement.
Answer: Optional TT260 with F10 probe can measure the coating thickness of 0-10mm.
